Fire Sense Patio Heater

Fire Sense Patio Heater Lpg Flame Mocha Finish Poolgear Plus Fire Sense Patio Heater

Fire Sense Patio Heater – Constantly start with the simplest causes and work down the list. Among one of the most usual mistakes is to misdiagnosing a pilot with a blockage and drilling a little hole to deal with the trouble! Never ever pierce the pilot light, as soon as the hole has been drilled the burner will act like a flame thrower and is a write-off!

First inspect the gas cyndrical tube has gas and is activated. This could be evident however it can be tough to determine just how much gas is in the cyndrical tube. Take the LPG hose pipe of the regulatory authority and transform the gas on for 2 to 3 seconds (no more) outdoors and far from any nude fire and do not smoke while making any fixings. If you could scent and listen to gas them the cyndrical tube has gas.

To inspect if the ignitor works just press the piezo red switch and place your thumb on the various other end. You need to really feel a sharp sting and hear it click, otherwise then the ignitor requires replacing. These are extremely simple to change, just pull the ignitor lead off the rear of the ignitor and unscrew to eliminate. Replace with a brand-new ignitor.

The very first consumable component to put on is a thermocouple, these could last anywhere between 1 year if you are unlucky and as much as 6 years depending upon using the fire sense patio heater, storage and kind. Changing the thermocouple fixes 90% of all firing troubles. An easy method to exercise what the parts appear like and how to fix them is to view fire sense patio heater thermocouple on the fire sense patio heater to get a match to your sort of fire sense patio heater.

Next on the consumables list is the electromagnetic valve. If a brand-new thermocouple hasn’t fixed the lights trouble take a look at the electromagnetic valve. This sits inside the gas control valve and is accessed by loosening the screw that holds the electromagnetic valve in place. When transforming always use plumbing technicians tape to reseal joints and prior to lighting the burner consult a leak examination. This is done by using a soap solution of one component fluid cleaning agent (washing-up fluid) and one component water. The soapy solution is related to the joints using a tidy spray bottle or tidy paint brush. Turn the LPG gas supply on however do not light the burner. Ensure the safety control valve on the burner is in the OFF position. If a leak is present, switch off the LPG gas supply. Tighten any fittings and re-test. Continue checking till all leaks and connections are tighten according the manufacturer’s guidelines.

3rd consumable component is a tilt switch. These could create similar firing troubles to mimic a used thermocouple. Simple to change on most fire sense patio heater, these are attached by means of two leads that push on to the tilt switch. Simply unclip and swap for a brand-new tilt switch. On some designs the tilt switch is soldered on by means of 2 leads, if your fire sense patio heater tilt switch has been soldered you will have to adjust accordingly.

Tags:

Leave a Reply

Your email address will not be published. Required fields are marked *